【數位】DIY Paper Pumpkin Treat Box 3D Papercraft PDF

DOWNLOAD PRINT ASSEMBLE Template of Box Pumpkin for assembly from paper or cardboard. Make your own Halloween pumpkin. The digital PDF template is ready for printing. The instruction in the file is attached. To assemble the model, you need to print this file on thick A4/Letter paper or cardboard. DIFFICULTY: easy PARTS: 6 SHEETS(A4): 3 PRINT: on colored paper COLOR: 2. Two pages for orange color, one page for green color. ASSEMBLY TIME: ≈ 80 minutes FINISHED model size: Height – 13 cm / 5,1", Width – 15 cm / 1.97" There are two ways to reduce the size of the model when printing: 1) Decrease the percentage from 100% to what you need. 2) Choose to print two pages on one sheet – then you will get half the size of the figure. You can choose to print four, six, and so on pages on one sheet. To increase the model: 1) Print the template in A3 (140%), A2 (200%), A1 (280%), and A0 (400%) format. A4 format is the default size of 100%. DOWNLOADABLE content: 1) Manual (PDF) 2) PDF template of the Pumpkin Box Materials required for assembly: 1. Paper sheet of A4/Letter 160-260 g/m2. 2. Scissors or a craft knife. 3. Ruler. 4. Inkless pen or awl, or use the blunt side of a craft knife. 5. Glue stick, PVA, or similar product. Do you have questions or comments? Please write me a message. Attention! This is a digital product! Electronic PDF format. The model template is not intended for commercial use and is copyrighted. But you can use the assembled physical model for commercial purposes. Author of HOBBYMO (Wiko Glitch) Instagram: @hobbymo.papercraft