【刺繡布貼】Sakura Fuji 櫻花富士

【刺繡布貼】Sakura Fuji 櫻花富士 ◎SIZE(CM)︰8X8 +/-0.2 ◎MATERIAL︰35% NYLON、65% POLYESTER ◎HEAT SEAL BACKING /軟膠 【用途、使用說明】 ▸熨斗燙之前先將溫度調整至150-180溫度，或依熨斗指示調整到衣服材質適合的溫度，約20-30秒 （若怕衣服被燙壞，可先在布貼上墊上一層薄棉布，勿使用掉色的布） 【貼心小提醒】 ▸在燙好後，用針線在布貼邊緣上縫幾針，這樣牢固服貼，又不易掉落。 ▸請勿使用強效洗潔劑或腐蝕性溶劑，造成本體外表傷害。 ▸因拍攝略有色差，圖片僅供參考，顏色請以實際收到商品為準。 ▸商品尺寸資料．可能會因某些因素產生誤差，誤差值在0.2公分上下為正常。 ☀免縫 可燙繡布貼☀ 【Embroidered Patch】Sakura Fuji ◎SIZE(CM)︰8X8 +/-0.2 ◎MATERIAL︰35% NYLON, 65% POLYESTER ◎HEAT SEAL BACKING / Soft Adhesive 【Usage Instructions】 ▸Before using the iron, set the temperature to 150-180 degrees or adjust it according to the fabric type as indicated by the iron's settings. Apply heat for about 20-30 seconds. (To avoid damaging the fabric, place a thin cotton cloth over the patch before ironing, and do not use fabric that may bleed color.) 【Tips】 ▸After ironing, sew a few stitches around the edge of the patch to ensure it stays securely in place and does not fall off easily. ▸Avoid using strong detergents or corrosive solvents, as they may damage the surface of the patch. ▸Due to slight color variations in photography, the image is for reference only. Please refer to the actual product color. ▸Product size data may have slight errors due to various factors, with an acceptable deviation of about 0.2 cm. ☀ No Sewing Required - Iron-on Patch ☀